Motorola Moto E4 XT1764 Flash File Firmware (Stock Rom Flash Guide)

On this page, you will get Download link for Official Motorola Moto E4 XT1764 Flash File (Firmware/Stock ROM). In this guide we will share how to Download & Install Motorola Moto E4 XT1764 Stock Firmware.

If you are facing any issue in your mobile like pattern/pin lock, boot loop, IMEI issue, stuck at logo, or revert back to stock rom then flash the Firmware File given in this article on your Motorola mobile phone.

Download Motorola Moto E4 XT1764  Flash File

Stock Rom is very useful because it is provided by the mobile developing company. So it is perfectly safe to use. It gives your lots of benefits. Some of them are given below-

Benefits of Stock Rom

Here are some major benefits to Download & Install Stock ROM Firmware on your device:-

  • Fix soft or hard brick in your device by flashing Stock Rom.
  • IMEI issues are possible to fix.
  • If your phone is malware affected then fix it with Stock Firmware.
  • Recover mobile from bootloop issue.
  • Fix Wifi and network related issues.
  • Reset or bypass FRP on your device.
  • Keep the warranty by reverting back to Stock Rom.
  • Get security patches by upgrading to latest Firmware.
  • If your device is dead, you can fix it with Stock Rom Firmware.

Download Motorola Moto E4 XT1764 Stock Rom

In this download section, you will get Stock Rom Firmware File for your Motorola Moto E4 XT1764 mobile device. You will find this file in zip file package. To use it for flashing, you need to unzip it on your PC or Device.

This file will be useful to remove software related bugs from your mobile. It can be used to upgrade or downgrade mobile software as well.

Firmware Details:-

Device Supported: Motorola Moto E4 XT1764
Android OS: Android 7.1.1 (Nougat)
Chipset: Mediatek MT6737M
Rom Type: Stock ROM

Download Firmware:

How to Flash Motorola Moto E4 XT1764

We have shared above firmware file for Motorola C XT1756 . Now it’s time to flash the device with downloaded firmware stock rom. Flashing process is not a rocket science that needs militry level training. Anyone can learn it with simple understanding.

In this article we have to use SP Flash Tool, USB Driver, and Firmware File for Flashing Stock Firmware. we also have some pre-requirements for installing Motorola Flash File. Let’s know about them –


  • You must have working pc.
  • A Working USB cable
  • Mobile should be charged up to 70%.
  • Take backup of your personal data & system data from your mobile and transfer backup to your computer. It keeps your data secure.
  • This Firmware will only work with Motorola Moto E4 XT1764 mobile.
  • Download, Extract & Install SP Flash Tool on your PC.
  • Download and Install USB Driver on Windows PC.
  • Download & Extract Morola Firmware File.

One you fulfil these requirements, you need to follow the guide given below. This will guide you throug the entire process of flashing the ROM.

How to flash Stock ROM using SP Flash Tool

We have tried to make a guide as simple as anyone with little technical knowledge of mobile can perform flashing. However, some people skip the important steps or try to flash in hurry. We won’t be liable if any damange occur in your phone during/end of the process.

Most of the time, damage happens due to negligance by the user. If don’t know what you are doing avoid this process.

We have provided you dowloaded link for Official Motorola Moto E4 XT1764 Firmware File which is 100% tested. If you feel any problem in following this tutorial, do comment below your problem by describing your mobile device.

Important Points:

  • Always take backup of your entire phone memory before you start flashing.
  • It may take some time so don’t do any activity on device and computer while flashing.
  • Always check if you are flashing the right firmware on your mobile. Installing wrong firmware can brick device permanenetly.
  • Use the instructions at your own risk.
  • Always install the compatible USB drivers otherwise PC will not be able to recognise device.

Leave a comment