How to Install Stock Rom on Lephone w7 [Remove Software Issues]

If you are searching for a guide to install stock rom on Lephone w7 using QGDP tool,then you are at right place. As you know that flashing is a process to install the new software on the mobile phone. IF you are getting software related issues on your mobile phone then those can be removed with the help of flashing process. Flashing firmware on Lephone w7 mobile can remove all such issues from your mobile phone.

In this post, you will be getting a step by step tutorial to install official stock rom on Lephone w7 mobile. I personally use the QGDP tool as Lephone w7 flash tool because I have worked with it and found it quite satisfying. The best thing is the tool is freely available to use. So, no need to buy a professional tool for flashing Lephone w7 mobile.

We are providing tested Lephone w7 flash file which comes in .cpb format. The QGDP tool is highly capable to flash .cpb flash file on your Lephone w7 mobile.

How to Install Stock Rom on Lephone w7

Before getting into flashing process, you would need drivers, flash tool and firmware file. With these things, you can easily flash the software on mobile.

About: How To Install Lephone W7 Stock ROM firmware

Model: Lephone W7

Firmware : Official

Tool : QGDP tool for Lephone W7

Download Lephone W7 Drivers, Flash File And Tool

Lephone W7 Flash Tool Download
DOWNLOAD [ QGDP Tool ] DOWNLOAD [ YGDP Tool ]

 

 

Lephone W7 Usb Drivers
DOWNLOAD MIRROR

 

 

Lephone W7 Flash File SPD Download
Download  [ Recommended ] Download [ All Versions ]

 

Install Stock ROM On Lephone W7 Using QGDP Tool [ Flash Lephone W7 ]

You should go through step by step process and you will learn how to flash lephone mobile using QGDP tool.

  1. Downlaod and install Lephone w7 USB drivers [spd drivers] to create a bridge connection between phone and the pc otherwise pc will not recognise your phone.
  2. Extract the firmware file and find the .cpb file from the folder. We will use it for flashing purpose.

NOte: Always use QGDP assembly tool for error free flashing.

 

  1. Install the QGDP tool and run it as administrator.It will ask for the password.
Password: ase or SMT or 369

 

  1. On the QGDP tool, click on config and locate the .cpb firmware file you downloaded on your pc. Now click on Apply button. It will configure all the required files. It will take some time. So just relax and site back for some time.

click on config

5. Now come to device and remove and reinsert its battery. Next press boot key of your Lephone w7 mobile.

Lephone W7 Boot Key : Press & Hold Volume up + Volume Down + insert USB cable at the same time.

  1. On the successful connection with the pc, it will create ‘SPRD U25 Diag Port’ under ‘device manager’.
  2. Now on the too, click on “Scan Port” Tab. Then click on “Scan” button. Select the open “com port” and click on “Save” button.

click on scan port

8. At last click on “Start” button to begin the flashing process.

click on start button

9. Flashing process will take 4-5 minutes in completion.

10. Once the flashing is done, reinsert the battery and boot your mobile.

11. Congrats, new stock rom has been installed on your Lephone w7 mobile.

It was all about Flashing Lephone W7 Stock ROM  using QGDP tool.You can download Lephone firmware flash file and install it on your pc to remove the common software related probs like hanging, no network prob, bootloop, etc. This is the simplest way I could tell you how to install stock rom on Lephone w7 phone.

If you find any problem while following above steps, do let me know in the comment section. I would try my level best to solve your queries.

About the author

Nikhil

Hey Reader,

Welcome to MyQuickIdea. I am Nikhil Saini, author of this blog from Jaipur, India.

I started MyquickIdea as a passion and now it's empowering newbies and helping them to learn basics of blogging with their blogs.

Here at MyQuickIdea I write about WordPress, Social-media, SEO and link-building.

You can read more about me at About page.

Leave a Comment