How to flash Stock ROM using SP Flash Tool

SPD Flash Tool

This article contains the instructions to install Stock Rom on MediaTek Devices using SP Flash Tool. Follow the Instructions carefully.

Caution: Flashing Stock rom using SP Flash Tool can remove your device device. So before proceding take the backup of entire phone data. Also follow the instructions at your own risk. Myquickidea will not be responsible for any kind of damage.

Guide to Install Firmware Using SP Flash Tool

Step 1: Download & Extract the firmware file (Stock rom) on your pc from the above download section.

Step 2: Download & install Mediatek Driver on your pc (skip this step if you have already installed it on your pc).

 Step 3: Download and extract SP Flash Tool on your pc.

Step 4: Now launch the Flash Tool on your pc.

Step 5: Once the SP Tool appear on the screen, click on Scatter-loading button.

Step 6: Now locate the AndroidScatter.txt in extracted Stock Rom folder.

Step 7:  Untick the PRELOADER option in the tool (because flashing PRELOADER can brick your phone).

Step 8: Next click on the Download button to start flashing process.  

Step 9: To begin with the flashing process on your device, switch off your phone, press and hold Volume Up (+) and Volume Down (-) key together and connect your phone with PC/Laptop Via USB cable. Hold the volume keys until your device connects to pc properly.

Step 10: Once the tool detects the device, flashing will start automatically.

Step 11: It will show the Green Right Mark when the flashing is done.

Step 12: Now you can disconnect the device and remove the USB cable from device.

The SP Flash Tool is provided by the Mediatek. Credit goes to Mediatek and a big thanks from our side.

Leave a comment